|
The Phase II UTG-2650 is a value packed ultrasonic thickness tester
with advanced capabilities. This dynamic sonic gage is
designed to measure thickness measurements down to .010" with a
resolution of up to .0001"!
After a quick calibration using a material of known thickness or
sound velocity the instrument will measure steel, aluminum,
titanium, plastics, glass and any other good ultrasonic wage
conductor as long as it has parallel surfaces in both inch and
metric!
|
 |
|
Model # |
List Price |
Sale Price |
Purchase |
|
UTG-2650 |
$1,895.00 |
$1,775.00 |
|
| Specifications: |
Model No. UTG-2650 |
| Display type |
4-digit LCD w/Back Light |
| Display Resolution |
Inch: 0.01", 0.001" or
0.0001" (selectable)
Metric: 0.1mm or 0.001mm (selectable) |
| Measuring Range |
Standard Mode: 0.010" -
0.787" (steel) |
| Accuracy |
+/-0.0002"
(0.005mm) if thickness < 3mm
+/-0.002" (0.05mm) if thickness < 20mm |
| Sound velocity range |
3280-32805 ft/s
(1000-9999m/s) Adjustable |
| Upper/Lower Limit Preset
Alarm |
Yes |
| Operating temperature |
32-122 degrees F |
| Refresh Frequency |
4MHz up to 25MHz |
| Memory |
500 Test Values |
| Output |
N/A |
| Power supply |
AA alkaline batteries (2pc) |
| Battery life |
Approx. 200 hours
(w/backlight off) |
| Power consumption |
Working current is less than
3V |
| Dimensions |
5.86 x 2.87 x 1.25 (149 x
73 x 32mm) |
| Weight |
5.6oz (160g) |
|
