|
 |
Buy Online & Save!
 Or call 702.456.2264! |
Electronic Surface Roughness
Testers - Profilometers
Now featuring two economical models to select
from! |
|
The latest in state-of-the-art surface roughness
testers, the SRG-4000 is designed with the shop environment in
mind. These surface roughness
testers are distinguished by a high level of accuracy, multiple parameters
and simplicity of operation. Extremely sensitive and highly accurate
readings from this Phase II surface roughness tester are offered via
multiple surface roughness parameters, Ra, Rq(Rms), Rt and Rz.
The diamond stylus is hypersensitive and sophisticated enough to allow for
a .001 (um) micron display resolution. The SRG-4000 surface roughness
testers utilize an easy interface to allow for changes of in/mm (uin/um),
cutoff length, sampling length, parameters, level of test(stylus
position), digital filters and more! Measurement results are displayed as
large characters on the LCD screen for easy recognition.
Battery powered portability allows the SRG-4000 surface roughness testers
to mobilize productivity throughout the shop.
Optional accessories available for the SRG-4000 surface roughness testers
include:
2um Stylus
Extension Rod
Stand
NIST certified surface roughness standard
Features:
- Menu driven operating system
- 4 Different roughness parameters
- Inside/Outside Diameters
- Stylus position indicator
- RS 232 output to printer/PC
- Extended memory functions
The PHASE II SRG-4000 Surface
Roughness Tester comes complete with a compact durable carrying case,
roughness standard, and instruction manual.
|
|
Technical Specifications: |
|
Roughness Parameters: |
Ra, Rz, Rq,
Rt |
| Assessed
Profiles |
Primary profile(p),
Roughness profile(R) tp curve (Mr) |
| Conformance
Standards: |
ISO/DIN/JIS/ANSI |
| Measuring
System |
Metric μm, Imperial μ
inch |
| Display
Resolution |
+/-20 μm = 0.001 μm
+/-40 μm = 0.002 μm
+/-80 μm = 0.004 μm |
| Display Range |
Ra, Rq: 0.005 μm up to
16 μm
Rz, Rt: 0.02 μm up to 160 μm |
| Pick Up
Measuring Range: |
+/- 80 μm |
| Sensor
Specifications: |
5 μm Diamond Tip
Stylus |
| Sensor Angle: |
90° |
| Contact Force: |
4mN (0.4gf) |
| Display
features |
Stylus position sensor
Battery level indicator
Direct display of parameters
Direct printing
Auto-off with auto store |
| Data output |
RS 232 to printer/PC |
| Cut-off
lengths |
0.25mm/0.8mm/2.5mm |
| Tracing length
Lt |
1.3mm – 17.5mm |
| Digital Filter |
RC, PC-RC, GUASSIAN,
D-P |
| Detector |
Diamond tip radius 5
μm |
| Power |
Li-Ion battery |
| Working
temperature |
5-40 degrees C. |
| Dimensions |
139mm x 56mm x 48mm |
| Weight |
450g |
| Item: |
List Price: |
Sale Price: |
| SRG-4000 |
$1,495.00 |
$1,375.00 |
|
|
|
|
|
|
The PHASE II SRG-1000
Surface Roughness Tester is a pocket-sized economically priced instrument
for measuring surface texture conforming to traceable standards. It can be
used on the shop floor in any position, horizontal, vertical or anywhere
in between.
The large LCD display shows either Roughness parameter Ra or Rz at the
touch of a button, combined with the selected cutoff length. External
calibration of the Roughness values is possible by means of a special CAL
button, which makes adjustment of this instrument very easy. A beep signal
informs the user about each individual measurement status when ready.
The easy to use SRG-1000 operates on various surfaces, not only flat but
also outer cylinder, outer cone, grooves, and recesses greater than 80x
30mm. The areas of application are wide spread. It is suitable for
inspection departments, quality control, on the shop floor during
machining, during assembly, and on site.
The SRG-1000 determines both Roughness parameters Ra and Rz within a wide
measuring range (see specifications below). The piezo-electric pick-up
stylus with diamond tip assures a very reliable measurement within
tolerances that conform to ISO class 3. Roughness parameter Ra is computed
to conform to ISO and Rz is computed to conform to DIN.
The PHASE II SRG-1000 Digital Roughness Tester
comes complete with a compact durable carrying case, roughness standard,
charger and instruction manual.
Only $1,195.00 List
Price!
Buy online and save $100.00! On-sale for only $1,095.00!
| Item # |
List Price: |
Sale Price: |
| |
|
|
| SRG-1000 |
$1,195.00 |
$1,095.00 |
| |
|
|
|
|
|
Roughness parameter: |
Ra (ISO), Rz
(DIN) |
|
Measuring range: |
Ra: 2 to 400
microinch (.05-10 micron)
Rz: 4 to 2000 microinch (.1-50 micron) |
|
Cut-off lengths: |
0.0009in,
0.03in, 0.09in |
|
Filter: |
RC analogue |
|
Tracing length: |
0.23in (6mm) |
|
Tracing speed: |
0.04in/second
(1.0mm/second) |
|
Accuracy: |
Conform ISO
Class 3 |
|
Pick-up stylus: |
Piezo-electric |
| Tracer
tip: |
Diamond,
radius 10µm +- 2.5µm |
|
Operating temperature: |
32-104 degrees
F (0-40 degrees C) |
| Power: |
3.6v / 2xNiMh
batteries |
|
Charger: |
9v DC |
|
Contact force on probe: |
<1.8ozf
(<50gf) |
| Static
measuring force of sensor stylus: |
<0.06ozf
(<1.6gf) |
|
Dimensions: |
4.9 x 2.8 x
1.0" (125 x 73 x 26mm) |
|
Weight: |
0.4lbs (200g) |
|
|
