Electronic Ultrasonic Thickness Gages
(Click on any photo for more technical specifications)
5-Year warranty on all models!
Model #UTG-1500
Click on photo for specifications
List Price is $595
Sale price is $555 - Save $40!
Model #:
Price:
Purchase:
UTG-1500
$555.00
The UTG-1500 comes complete with
compact durable carry case, 5MHz probe, coupling gel and operation
manual.
The
newPHASE
II UTG-1500 is an economic hand held microprocessor controlled thickness
gauge specifically designed for measuring the thickness of metallic
and non-metallic materials such as aluminum, titanium, plastics,
ceramics, glass and any other good ultrasonic wave-conductor as long
as it has parallel top and bottom surfaces. With uses in many areas of
industry, the UTG-1500 can perform precise measurements on various
types of raw materials, component parts and assembled machinery. It
can also be used to monitor all types of pipes and pressure vessels
for loss of thickness due to corrosion or erosion.
The principle of ultrasonic wave in the thickness measurement is
similar to that of the optical wave. The ultrasonic wave pulses
transmitted by the probe reach the object to be measured and propagate
in the object and when they reach the interfaces, they are reflected
back. The thickness of the object is determined by precisely measuring
the time the ultrasonic wave travels in the object. To increase
accuracy, the UTG-1500 is equipped with an automatic gain control and
v-path error correction.
The UTG-1500 is extremely easy to use. After a
simple calibration to a known thickness or sound velocity, the gauge
will give accurate readings in inches or millimeters.
Model #UTG-2000
and #UTG-2020
Click on photo for specifications
Model #UTG-2000 is $995.00 List Sale price is $925 - Save $70
Model #UTG-2020 is $1,495.00
List Sale price is $1,345 -
Save $150
Model #:
Price:
Purchase:
UTG-2000
$925.00
UTG-2020
$1,345.00
The Phase II UTG-2000 & UTG-2020
deluxe,
state of the art,
digital Ultrasonic Thickness Testers are menu driven,
multi-functional units offering everything from the basic measurement to
extended memory and RS 232 output capabilities. This dynamic series
of gages are designed to measure the thickness of metallic and
non-metallic materials such as aluminum, titanium, plastics, ceramics,
glass and any other good Ultrasonic wave conductor as long as it has
parallel top and bottom surfaces. The UTG-2000 series gages will
accurately display readings in either inch or millimeter after a simple
calibration to a known thickness or sound velocity.
Model No. UTG-2000: standard unit has measuring capabilities only and does not
include the mini-printer or PC cable; includes carrying case.
Model No. UTG-2020: standard unit incorporates vast memory
functions, mini-printer, PC cable, operations manual and includes carrying
case.
All Ultrasonic Testers include custom carry case.
Note: UTG-1500 unit shown are now red in color.
Optional probe compatible with the UTG-2000/2020 Ultrasonic testers shown above:
Model #
Frequency:
Range:
Usage:
Price:
Purchase:
PT-6
5MHz
0-8"
Small Diameter
$195.00
The PT-6 probe
has a 1/4" diameter tip for testing smaller parts and curved
surfaces It is not compatible with
the UTG-1500
Model #UTG-2800
Click on photo for specifications
Model #UTG-2800
is $795.00 List Our price is $745 Net Save $50
!
NEW! Ultrasonic
Thickness Gauge
Model No. UTG-2800
State of the art, digital ultrasonic
thickness gauge is packed with features typically found on high end
models only.
This multi-functional ultrasonic thickness gauge offers
everything from basic measurement, Scanning Capabilities, Adjustable
Sound Velocity, extended memory and USB output capabilities. This
dynamic ultrasonic thickness gauge is designed to measure the
thickness of metallic and non-metallic materials such as steel,
aluminum, titanium, plastics, ceramics, glass and any other good
ultrasonic wave conductor as long as it has parallel top and bottom
surfaces.
The UTG-2800 ultrasonic thickness gauge will accurately
display readings in either inch or millimeter after a simple
calibration to a known thickness or sound velocity.
Model #:
Price:
Purchase:
UTG-2800
$745.00
Model #UTG-2600
Click on photo for specifications
Model #UTG-2600 is $1,295.00 List Our price is $1,195 Net Save $100
!
State of the art, digital ultrasonic
thickness gauge is capable of reading wall thickness thru coatings
and paint without affecting the measurement and is packed with the
most popular features including basic measurement, Scanning
Capabilities, Adjustable Sound Velocity, extended memory and RS232
output capabilities.
This dynamic ultrasonic thickness gauge is
designed to measure the thickness of metallic and non-metallic
materials such as steel, aluminum, titanium, plastics, ceramics,
glass and any other good ultrasonic wave conductor as long as it has
parallel top and bottom surfaces.
The UTG-2600 ultrasonic thickness gauge
will accurately display readings in either inch or millimeter after
a simple calibration to a known thickness or sound velocity.
UTG-2600 ultrasonic thickness gauge comes
complete with Certificate of Calibration, Operation Manual and
Custom Carry Case.
Model #:
Price:
Purchase:
UTG-2600
$1,195.00
Model #UTG-2650
Click on photo for specifications
Our Best: Model No.UTG-2650
The Phase II UTG-2650 is a value packed ultrasonic thickness tester
with advanced capabilities. This dynamic sonic gage is
designed to measure thickness measurements down to .010" with a
resolution of up to .0001"!
After a quick calibration using a material of known thickness or
sound velocity the instrument will measure steel, aluminum,
titanium, plastics, glass and any other good ultrasonic wage
conductor as long as it has parallel surfaces in both inch and
metric!
Model #
Price:
Purchase
UTG-2650
$1,775.00
Model #UTG-2650
is
$1,895.00 List Our Price is $1,775.00 Net.
Save $120.00
Or call 702.456.2264!
