|
"Builders of CMMs that last" |
| As one of the
oldest and most experienced CMM companies in the United States,
Helmel
Engineering offers a variety of products & services related to this
industry. Their mission is and always has been to produce a highly reliable
CMM.
Helmel's
GEOMET
software is powerful, time proven and simple to use. Their unique approach to design
provides you with very practical yet very sophisticated systems that include
maintenance-free bearings, intrinsic accuracy, easy operation, good support
and perhaps most importantly...long life. Helmel Engineering is
synonymous with value; offering several low cost CMMs such as the
Checkmaster. And every Helmel Engineering CMM is made right here in the USA! |
|
Available CMM Models:
(Click on the Icon above for a
larger image or on the Model Name below for
more information) |
|
Prices start at an unbelievably low $13,950 for the 12x12x10 Manual
Checkmaster and just $24,950 for the DCC (Direct Computer Controlled)
version! The Phoenix DCC 16x20x14" lists at $31,900. Manual CMMs
include GEOMET Junior Software, Computer System and TP-ES Touch Probe.
DCC CMMs include GEOMET 101 DCC Software, Machine Cabinet and Computer
System. Several probe kits are optionally available. Contact us
today for all other prices. |
| Model Name: |
Picture: |
Type: |
Size Range: |
Drive: |
|
Checkmaster |
 |
Benchtop |
12x12x10" to 20x16x14" |
Manual &
DCC |
|
Phoenix |
|
Heavy-Duty |
16x20x14" |
DCC only |
|
Microstar |
|
Medium
to Large |
20x20x16" to 100x40x25 |
Manual &
DCC |
|
Microstar HS |
|
High
Speed Gantry |
40x30x20/25" to 60x30x20/25" |
DCC
only, Linear Motors |
|
Microstar L |
|
L-Bridge |
60x45x40" to 120x60x40" |
DCC
only, Linear Motors |
|
Shaft Checker-H |
|
Horizontal |
12-60"
Length, 4" Swing radius |
Manual
only |
|
Shaft Checker-V |
|
Vertical |
12-22"
Length, 4" Swing radius |
Manual
only |
|
4-Axis Crankshaft |
|
Horizontal |
30-50"
Length, 6" Swing radius |
DCC
only, Linear Motors |
|
|
In addition to these
fine CMM's, Helmel Engineering also markets GEOMET software for CMM
retrofits and popular Renishaw & Fowler touch probes. |
|
Contact us today for further information on any Helmel
product! |
|
